The High Quality Paint Jobs in Miami FL 33167 Case Study You'll Never Forget


If you work in this kind Service of industry, you need to always make sure that you observe electrical construction safety as you go about your day-to-day work routine. Even the most professional electricians and contractors are exposed to the dangers and risks of electricity while working, which is why everyone should be aware of the possible dangers that may happen.

Why electrical construction accidents occur

Construction sites are highly dangerous because of its harsh environment, not to mention the fact that there will be a lot of workers working with machinery and equipment that are usually run by electricity. The most common mistake that these workers commit is getting near or working on equipment that they thought are already dead, but they there were in fact wrong and that's when the accident happens. Another case is that there are workers with no adequate training and knowledge when it comes to electrical construction safety rules and regulations, hence they do not take the necessary precautions. There are also instances when electrical equipment was used improperly.

Preventing electrical hazards

The first step to preventing these hazards and risks from occurring is to be always responsible. As a worker or as an electrician, you must be aware of the obligations and legal duties that your profession comes with. It is your moral duty to abide by these rules and regulations in order to protect your safety and of course, the safety of your co-workers, as well. Electrical systems should be constructed properly to prevent dangers. Regular maintenance and inspection should also be done to ensure that the system is working properly as expected.

With regards to any electrical equipment, only those who are skilled and licensed enough should be the ones to operate or work with the equipment. If you think you do not have enough knowledge about it, don't take the risk and just leave it to someone who is experienced enough to handle the job. There must be enough outlets and sockets around the work area so that overloading won't have to happen. Adapters are not recommended in electrical construction sites since it can lead to fire incidents when overloaded.

If you can, reduce or lower the voltage of power as it helps in eliminating the risk of burns and electrical shocks. Once the equipment is already faulty and not suitable for use, take it out of the workplace immediately, or at least have it labeled as "Do Not Use" for other workers' reference. In cases when equipment repair is necessary, only call out for technicians or workers who can adequately and expertly do the job. Never assume or take chances when you are not 100% sure of anything. Remember that one simple mistake can lead to something fatal or serious, so you have to be cautious all the time.

You will also have to wear protective gears and clothing whenever you are working in an electrical construction environment. You can Affordable Painting Service in Kingsport, TN wear protective gloves and body suits that are non-conductive, to make sure that you stay as protected and as safe as possible.

Although the rewards are several, they come with responsibilities for the safety of the public and the electrician. An individual who wishes to be an electrician should be willing to comply with the codes as well as the safety rules created to protect the public. Similarly, one needs to have a wide understanding of the responsibilities of an electrician as well as his work context.

Job description

An electrician provides electrical equipment repair services to businesses and homes. He is responsible for setting up and maintaining fuses, electrical outlets and other sections involved in electricity flow. An electrician can specialize in either construction or maintenance. He must be able to study blue prints and maintain data, video and voice wiring. Companies often hire electricians to undertake installation of electrical equipment. Usually, they use both power tools such as saws and drills and hand tools like wire strippers, pliers and screwdrivers.


Electricity can be life threatening if not channelled or handled properly. The most harmful hazard an electrician can encounter is electrical shock, which can at times cause death. Other job hazards include falls when climbing scaffolds and ladders or injuries from cuts while using sharp tools like knives or saws. An electrician must comply with safety rules associated with working with electricity. Likewise, he is responsible for providing public safety by following regulations or codes that have been put into place pertaining electrical appliances and electricity. It is necessary that electricians follow state, local codes as well as national electrical codes.

Types of electricians

Electricians are of three major types namely factory, maintenance and construction. Normally, an electrician concentrates on only one major area though some function in both the maintenance and construction field. Construction electricians set up wiring systems to new constructions such as factories, businesses and homes. They also set up electrical outlets, breaker boxes and other electrical system components. On the other hand, maintenance electricians are in charge of repairing, replacing and inspecting wiring systems. The tasks involve troubleshooting Affordable Handmade Accessories in Surprise AZ for electrical faults, replacing faulty wires or other components such as light switches, electrical outlets and breaker boxes. Factory electricians troubleshoot, install and undertake maintenance tasks on motors, industrial robots, electrical generators and controls on machinery.

Educational requirements

To become an electrician, you need to register in an apprenticeship program. The program combines on-the-job training with classroom instruction under the supervision of qualified electricians. To register in such a program, you should have a GED or high school diploma. Additionally, you must be not less than 18 years of age. Generally, these apprenticeship programs last for four years. They include 144 hours and 2000 hours of classroom instruction and on-the-job training every year respectively.

Professional requirements

Most municipalities and states need licensed electricians. To get a license, one needs to pass an examination that tests the national electrical code, local building and electrical codes and knowledge of electrical theory. An electrician should have eye-hand coordination and good manual dexterity. He must also possess a good sense of balance as well as be physically fit. Since an electrician should be able to recognize wires by colour, great colour vision is essential. To succeed also in this career one needs to have certain personal qualities or soft skills. Strong troubleshooting skills will enable the electrician to find out the major cause of electrical problems and how well to fix them. Critical thinking skills are also useful as they assist the professional in evaluating the pros and cons of probable solutions.


The salary range of an electrician falls between $12 and $35 per hour. On the other hand, the average salary that he earns is approximately $21 per hour. Wages paid hourly are based on experience. The salary increases as the electrician earns more experience. Benefits are also dependent upon the organization for which the professional works. Similarly, it depends on whether the electrician is a union member or not. Many unions represent electricians, though this depends on the kind of field the professional works in. In respect to the Affordable Hair Extensions In Milwaukee WI wage potential, the increase in the number of jobs within the electrical field often depends on certain factors such as state of the economy and the population growth.

Advancement Opportunities

A qualified electrician has several opportunities for advancement. He can advance to a supervisor or a project manager in construction firm. A few electricians choose to venture into business and become contractors. Others also climb to the position of electrical inspectors for municipalities.